Need a mower that can catch? Well, the Toro Direct collect is a mower that competes with other catching mowers in the market and wins comfortably. Perfect contractors and recreational grounds which have large areas that require the grass to be collected and taken away.
Powered by a super reliable 25HP V-Twin Kohler Command Pro engine and fitted with a 42" closed, floating cutting deck with counter-rotating twin blades. The mower is zero-turn also which will save you countless time whilst on the job.
Let's have a look at what makes this machine the elite mower! Fitted with hydraulic pumps that have the latest technology requiring no cooling fans. The belts are extremely easy to get to due to its unique engine fitment. It features a 7 gauge steel fabricated side and 10 gauge continuous bead weld for superior strength.
One massive positive is this mower can easily be switched from catching to mulching. Two bolts need to be changed and the deck remains the same. That's how easy it is. You can even mulch 75% and catch 25% of the grass clippings if you would like to. Competing models have separate decks you must install to switch to mulch and some even require 4 blades!!!
The massive 6" outlet into the hopper also makes this unit to catch better and has a larger impeller which can provide up to 50% more displacement to vacuum and collect. A deeper deck a 4 5/8" means it can mulch better and it is also stronger.
Buy Toro. Buy the best.
Specifications
Engine | 25HP Kohler Command Pro 725cc (18.6kw) |
---|---|
Fuel Capacity | 28.4 L |
Cutting Width | 42" (106.7cm) |
Adjustable Discharge Baffle | Standard |
Air Filter | Heavy-Duty Canister Air Cleaner |
Blade Tip Speed | 18,500 ft/min (5,640 m/min) |
Blade Type | .164" (.417 cm) heat-treated steel |
Carrier Frame | 2" x 1.5" x 11 gauge |
Caster Tyres | 8" x 3" - 4" (semi pneumatic) |
Clutch | Mechanical (lever-operated) |
Deck Design | 7/10 Gauge |
Drive System | Tandem Pumps (12cc/rev) & Wheel Motors (18 cir) |
Rear Tyres | 18" x 10.5" - 10" |
Displacement | 725cc |
Ground Speed | Up to 11.4 km/h (Forward) |
Height of Cut | 2.5cm - 10.2cm (.6cm increments) |
Hopper Capacity | 76 Gallons |
Hour Meter | Yes |
Spindle Housing | Cast Iron Gearbox |
Steering Controls | Hand Control Levers |
Weight | 517.1kg |
Disclaimer | *The gross horsepower of these gasoline engines was laboratory rated at 3600 rpm by the engine manufacturer in accordance with SAE J1940 or SAE J2723. As configured to meet safety, emission and operating requirements, the actual engine horsepower on these mowers will be significantly lower. |
Related Products
Starter Motor Early Type Suits 452cc Tre0801 St500
...
Side Plate Suits Lc1p70fc / 48am7m / 53al7imsp
...