- AUS-WIDE SHIPPING AVAILABLE (CAN SHIP TO NEAREST DEPOT IF IN A REMOTE AREA) - CONTACT US (ONLY 2 AVAILABLE)
The heavy-duty Honda WT 3" trash pump is designed to handle hard work in a harsh environment and still perform so you can get the job done.
This unit features a 27m head that can deliver up to a huge 1,210 liters per minute WHILST HANDLING SOLIDS UP TO 20.5MM IN SIZE! This unit is aimed to work on job sites and on applications where the water is not clean, the durability and all-round strength of this machine set it above its competitors in the same class. This machine is capable of moving a huge amount of water in a short period of time meaning it is more efficient and allows you to get the job done faster!
Powered by the ever-reliable Honda GX270 Engine that provides consistent 4-stroke power which is easy to start and easy to use! The oil alert ensures you will never ever run the machine low on oil as it prevents the unit from starting if the oil level is dangerously low. This is a considerably large engine for a trash pump which then provides ample power that results in the large volume of water that can be transfered.
The cast iron volute impeller increases the life of the pump and the unique conical shaped impeller improves/ helps pump-priming and also gives the machine a higher discharge capacity. The isolation mounts reduce the vibration of the unit and keep the pump from "walking" away or "burying" itself in the soil. The heavy-duty roll frame makes the unit easy to carry and also protects it from damage in the back of the truck and when on the ground. This unit also features abrasion-resistant silicone-carbide seals for extended wear, another reason to buy a Honda pump as they set the bar so high when it comes to the quality of their products.
Specifications
Engine | GX270 |
---|---|
Displacement | 242CC |
Bore and Stroke | 3.0" x 2.3" |
Pump Type | Trash Centrifugal Self-priming |
Volute | Rigid Mounted Cast Iron w/ Stainless Wear Plate |
Impeller | Conical Cast Iron |
Mechanical Seal (Pump case / impeller) | Silicon Carbide/Silicon Carbide |
Priming time | 90 sec. @ 5M |
Drive system | Direct |
Discharge capacity | 1210L / min |
Suction port diameter | 3" |
Discharge port diameter | 3" (76.2mm) |
Suction | 8m |
Head | 27m |
Performance | 1210L / min |
Solids handling | 20.5mm |
Dimensions (LxWxH) | 660 x 495 x 515 (mm) |
Dry Weight | 47kg |
Oil Alert | Yes |
Related Products
...
Greenworks OptimusZ 60" 24kWh Zero-Turn Mower (Rear Discharge)
...